CareerGPS

Rolling%20Machine%20Setters,%20Operators,%20and%20Tenders,%20Metal%20and%20Plastic
Summary Occupational Forecast Data for Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
Employment Employment Change Average Annual Job Openings Wage & Training Levels
2020 2025 Numerical Percent New Jobs Replacement Jobs Total Median Hourly Median Annual Training Levels
13 14 1 9.63% 0 1 2 $19.96 $41,514 High school diploma or equivalent
Description: Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate or to flatten, temper, or reduce gauge of material.
Forecast Data Source: EMSI (4th Quarter 2022)

Occupation Details

The information in this section represents occupational characteristics included in O*NET which defines key features of an occupation as a standardized, measurable set of variables called "descriptors". These distinguishing characteristics of an occupation are described in greater detail in the O*NET Content Model. All items are listed in descending order of importance.

  • Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
  • Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
  • Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
  • Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
  • Manipulate controls and observe dial indicators in order to monitor, adjust, and regulate speeds of machine mechanisms.
  • Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
  • Set distance points between rolls, guides, meters, and stops, according to specifications.
  • Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
  • Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
  • Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
  • Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
  • Record mill production on schedule sheets.
  • Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
  • Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.

Knowledge

62%
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
61%
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
52%
Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

Skills

75%
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
75%
Operation and Control - Controlling operations of equipment or systems.
69%
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
69%
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
60%
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
56%
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
53%
Time Management - Managing one's own time and the time of others.
53%
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
53%
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
53%
Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
53%
Coordination - Adjusting actions in relation to others' actions.
53%
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
50%
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
50%
Repairing - Repairing machines or systems using the needed tools.
50%
Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making.
50%
Speaking - Talking to others to convey information effectively.
50%
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.

Abilities

78%
Reaction Time - The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
75%
Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
72%
Rate Control - The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
72%
Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
72%
Near Vision - The ability to see details at close range (within a few feet of the observer).
66%
Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
66%
Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
66%
Multilimb Coordination - The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
62%
Static Strength - The ability to exert maximum muscle force to lift, push, pull, or carry objects.
62%
Far Vision - The ability to see details at a distance.
60%
Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
60%
Perceptual Speed - The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes compa
60%
Selective Attention - The ability to concentrate on a task over a period of time without being distracted.
60%
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
60%
Auditory Attention - The ability to focus on a single source of sound in the presence of other distracting sounds.
56%
Depth Perception - The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
56%
Trunk Strength - The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without 'giving out' or fatiguing.
56%
Response Orientation - The ability to choose quickly between two or more movements in response to two or more different signals (lights, sounds, pictures). It includes the speed with which the correct response is started with the hand, foot, or other body part.
56%
Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
56%
Finger Dexterity - The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
56%
Visualization - The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
56%
Flexibility of Closure - The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
56%
Oral Expression - The ability to communicate information and ideas in speaking so others will understand.
53%
Written Comprehension - The ability to read and understand information and ideas presented in writing.
53%
Hearing Sensitivity - The ability to detect or tell the differences between sounds that vary in pitch and loudness.
53%
Inductive Reasoning - The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
53%
Category Flexibility - The ability to generate or use different sets of rules for combining or grouping things in different ways.
50%
Stamina - The ability to exert yourself physically over long periods of time without getting winded or out of breath.
50%
Speed of Limb Movement - The ability to quickly move the arms and legs.
50%
Speech Recognition - The ability to identify and understand the speech of another person.
50%
Speech Clarity - The ability to speak clearly so others can understand you.

Work Activities

90%
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
86%
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
85%
Operating Vehicles, Mechanized Devices, or Equipment - Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or water craft.
85%
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
78%
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
73%
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems.
73%
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
72%
Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
72%
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
68%
Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job.
65%
Coordinating the Work and Activities of Others - Getting members of a group to work together to accomplish tasks.
64%
Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
63%
Getting Information - Observing, receiving, and otherwise obtaining information from all relevant sources.
61%
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
58%
Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work.
58%
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
56%
Training and Teaching Others - Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
56%
Interacting With Computers - Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information.
56%
Repairing and Maintaining Electronic Equipment - Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
55%
Coaching and Developing Others - Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
53%
Judging the Qualities of Things, Services, or People - Assessing the value, importance, or quality of things or people.
52%
Establishing and Maintaining Interpersonal Relationships - Developing constructive and cooperative working relationships with others, and maintaining them over time.
50%
Scheduling Work and Activities - Scheduling events, programs, and activities, as well as the work of others.
Title Job Zone Two: Some Preparation Needed
Overall Experience Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
Job Training Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples These occupations often involve using your knowledge and skills to help others. Examples include sheet metal workers, forest fire fighters, customer service representatives, physical therapist aides, salespersons (retail), and tellers.
Education These occupations usually require a high school diploma.

Interests

Realistic - Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outsi
Conventional - Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.
Enterprising - Enterprising occupations frequently involve starting up and carrying out projects. These occupations can involve leading people and making many decisions. Sometimes they require risk taking and often deal with business.

Work Styles

Attention to Detail - Job requires being careful about detail and thorough in completing work tasks.
Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations.

Work Values

Support - Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.