CareerGPS

Radio%20Mechanics
Summary Occupational Forecast Data for Radio, Cellular, and Tower Equipment Installers and Repairers
Employment Employment Change Average Annual Job Openings Wage & Training Levels
2020 2025 Numerical Percent New Jobs Replacement Jobs Total Median Hourly Median Annual Training Levels
103 108 5 4.63% 1 12 13 $30.05 $62,509 Associate's degree
Description: Test or repair mobile or stationary radio transmitting and receiving equipment and two-way radio communications systems used in ship-to-shore communications and found in service and emergency vehicles.
Forecast Data Source: EMSI (4th Quarter 2022)

Occupation Details

The information in this section represents occupational characteristics included in O*NET which defines key features of an occupation as a standardized, measurable set of variables called "descriptors". These distinguishing characteristics of an occupation are described in greater detail in the O*NET Content Model. All items are listed in descending order of importance.

  • Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
  • Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.
  • Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.
  • Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.
  • Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.
  • Calibrate and align components, using scales, gauges, and other measuring instruments.
  • Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.
  • Test emergency transmitters to ensure their readiness for immediate use.
  • Mount equipment on transmission towers and in vehicles such as ships or ambulances.
  • Insert plugs into receptacles, and bolt or screw leads to terminals in order to connect equipment to power sources, using hand tools.
  • Test batteries, using hydrometers and ammeters, and charge batteries as necessary.

Knowledge

80%
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
77%
Telecommunications - Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.
75%
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
73%
Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
63%
Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
53%
Physics - Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub- atomic structures and processes.
52%
Public Safety and Security - Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
51%
Design - Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

Skills

69%
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
65%
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
65%
Repairing - Repairing machines or systems using the needed tools.
60%
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
60%
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
60%
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
56%
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
56%
Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
56%
Speaking - Talking to others to convey information effectively.
53%
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
50%
Operation and Control - Controlling operations of equipment or systems.
50%
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
50%
Equipment Selection - Determining the kind of tools and equipment needed to do a job.
50%
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.
50%
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
50%
Time Management - Managing one's own time and the time of others.

Abilities

69%
Finger Dexterity - The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
69%
Near Vision - The ability to see details at close range (within a few feet of the observer).
66%
Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
66%
Inductive Reasoning - The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
66%
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
66%
Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
62%
Visualization - The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
62%
Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
60%
Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
60%
Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
56%
Oral Expression - The ability to communicate information and ideas in speaking so others will understand.
56%
Flexibility of Closure - The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
53%
Speech Recognition - The ability to identify and understand the speech of another person.
53%
Speech Clarity - The ability to speak clearly so others can understand you.
50%
Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
50%
Multilimb Coordination - The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
50%
Written Comprehension - The ability to read and understand information and ideas presented in writing.
50%
Selective Attention - The ability to concentrate on a task over a period of time without being distracted.

Work Activities

93%
Repairing and Maintaining Electronic Equipment - Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
78%
Interacting With Computers - Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information.
77%
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
74%
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems.
72%
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
71%
Performing for or Working Directly with the Public - Performing for people or dealing directly with the public. This includes serving customers in restaurants and stores, and receiving clients or guests.
70%
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
69%
Getting Information - Observing, receiving, and otherwise obtaining information from all relevant sources.
67%
Thinking Creatively - Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
67%
Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job.
66%
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
66%
Communicating with Persons Outside Organization - Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
66%
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
64%
Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work.
62%
Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
62%
Analyzing Data or Information - Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
60%
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
59%
Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
58%
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
55%
Establishing and Maintaining Interpersonal Relationships - Developing constructive and cooperative working relationships with others, and maintaining them over time.
53%
Processing Information - Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
51%
Judging the Qualities of Things, Services, or People - Assessing the value, importance, or quality of things or people.
51%
Monitoring and Controlling Resources - Monitoring and controlling resources and overseeing the spending of money.
50%
Estimating the Quantifiable Characteristics of Products, Events, or Information - Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
Title Job Zone Three: Medium Preparation Needed
Overall Experience Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.
Job Training Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples These occupations usually involve using communication and organizational skills to coordinate, supervise, manage, or train others to accomplish goals. Examples include food service managers, electricians, agricultural technicians, legal secretaries, interviewers, and insurance sales agents.
Education Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree.

Interests

Realistic - Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outsi
Investigative - Investigative occupations frequently involve working with ideas, and require an extensive amount of thinking. These occupations can involve searching for facts and figuring out problems mentally.
Conventional - Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.

Work Styles

Integrity - Job requires being honest and ethical.
Attention to Detail - Job requires being careful about detail and thorough in completing work tasks.
Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations.
Initiative - Job requires a willingness to take on responsibilities and challenges.
Persistence - Job requires persistence in the face of obstacles.
Analytical Thinking - Job requires analyzing information and using logic to address work-related issues and problems.

Work Values

-